If you have a hair dryer or a heat gun, you can also heat the adhesive using its warm air exhaust.Squeegee any air bubbles or gaps that may exist between the surface and the tape. Make sure to press it firmly through your hands or palm. You can increase the bonding strength by pressing it against the surface.Also, to improve the bonding strength, it is recommended to apply as much tape as possible as the surface area allows. The adhesive liner needs to be removed to expose the sticky side. The Double-sided Woodworking Tape’s adhesive liner is yellow in color while the adhesive tape itself is cream/white. You could use any flat tipped object like your nail or a thin card to initially create a small gap which can be fully peeked to release the liner. Apply more strips by repeating steps 2-5.To separate the adhesive liner easily, you can use any flat tipped object like a card, knife’s edge or your fingernail to create an initial gap between the liner and the tape. The tension will make the tape easier to cut. Apply some tension by slightly pulling the roll, then cut the tape.Apply the tape on the surface, with the other end still spooled on the roll.Lint, dirt, and dust can significantly lessen the bonding strength of adhesives.

Clean both surfaces where you would be installing the tape.Bubble Cushioning Wrap Rolls w/ Fragile Stickers

Xfasten double sided tape home depot